Skip to main content

TP-Link Wifi Password Change (All Models) Support



Tp link password change , password change in tp link, tp ;ink router password change , tp link router password change by mobile , wifi password change, wifi password change tp-link

The TP-Link TL-WR841N wifi modem is a popular wifi modem because of its affordable price and strong Wi-Fi, suitable for households and small shops. After a long time of using, if you feel your home network speed is significantly slow, it is likely that your home wifi password is exposed and there are many people who connect and use the temple. The most urgent thing now is to change the wifi password, but not everyone can do it. In the following article I will guide you through how to change the wifi password on the TP-Link TL-WR841N modem. Please follow along.

  • Open Your Mobile Browser ( Chrome )
  • In search bar Type 192.168.0.1 or 192.168.1.
  • Enter Username and Password then click Login

      • Usernmae : admin
      • Password : admin

  • Click Quick Setup
  • After clicking again Click Next
  • you can see Wireless Name And wireless Password :
  • Change the name and password as your choice 
  • Then Click Next and Click Finish

While changing passwords, always remember the password or copy the password. Type carefully while typing capital and small letters. *

For More Detail Watch Video On Youtube



Step 1: Open a browser on your computer or phone and access the admin page of the TP-Link modem by entering the address on the back of the modem.

you can enter 192.168.0.1 or 192.168.1.1 depending on the type of modem.

 

Step 2: When you access the admin page, you will have to log in with your account and password (written on the bottom of the modem with the IP address shown above).

The account and password are usually admin.


Step 3: Select the Wireless network item after logging in to the admin page.

Next you select Secured wireless network, then you enter a new wifi password box. Wireless network with a password.

 

Enter the new password, scroll down, and click Save.

 

So we have successfully changed the wifi password on the TP-Link modem with a completely Vietnamese interface, so you can do it easily. Thank you for reading the article.

Read Also : 

Comments

Popular posts from this blog

BDCOM OLT All Commands ( BDCOM )

 

BDCOM How to reboot ONU

  When connecting, let’s switch to elevated privilege mode:        Enable       epon reboot onu interface ePON 0/2:1           Are you sure to reboot the ONU(y/n) To answer the question below, press the y key  Watch full videos in YouTube Visit Also BDCOM How to reboot ONU -  New! BDCOM. How to reboot ONU How to view information about ONU on BDCOM OLT Setting up BDCOM P3310 EPON

Configuring Cisco Nexus N3K-C3064PQ-10GX Cisco Nexus 3000)

  The switch has 48 SFP+ 10 Gb/s and 4 QSFP+ 40 Gb/s ports When connecting for the first time through the console, specify the password for the admin user: Do you want to enforce secure password standard (yes/no): yes    Enter the password for "admin":    Confirm the password for "admin":       Would you like to enter the basic configuration dialog (yes/no): no Switch to configuration mode and specify the firmware file: configure terminal show incompatibility nxos bootflash:nxos.7.0.3.I4.6.bin boot nxos bootflash:/nxos.7.0.3.I4.6.bin exit Save the configuration and reboot the switch: copy running-config startup-config   reload This command will reboot the system. (y/n)?  [n] y Next, we look at the current and saved configuration: show running-config show startup-config During switching on the switch, if necessary, you can switch to bootloader mode: Press  ctrl L to go to loader prompt in 2 secs From the bootloader, ...