Skip to main content

ABOUT US



Thank you for coming to the Madankc.com.np website.

Hello, I'm Madan KC. I'm a small blogger who writes about Windows, Android, and iOS, Wi-Fi, routers, and technology on my blog. I update the blog daily.

I work for an internet service provider. I will post a blog about what I learn in my daily life. I shared the blog because you can find the best quality posts so you can learn easily.

The purpose of the blog is primarily to help people get the necessary information for free.

For cooperation and advertising in the blog, please contact through the Contact Me
Please write immediately the price you can offer for advertising.
Because of the big employment I can not answer everyone, who really needs it and I did not answer – write again, I will answer, please treat this with understanding.

Thank you. Keep supporting me.

Popular posts from this blog

BDCOM OLT All Commands ( BDCOM )

 
Post a Comment
Read more

BDCOM How to reboot ONU

  When connecting, let’s switch to elevated privilege mode:        Enable       epon reboot onu interface ePON 0/2:1           Are you sure to reboot the ONU(y/n) To answer the question below, press the y key  Watch full videos in YouTube Visit Also BDCOM How to reboot ONU -  New! BDCOM. How to reboot ONU How to view information about ONU on BDCOM OLT Setting up BDCOM P3310 EPON
Post a Comment
Read more

Configuring Cisco Nexus N3K-C3064PQ-10GX Cisco Nexus 3000)

  The switch has 48 SFP+ 10 Gb/s and 4 QSFP+ 40 Gb/s ports When connecting for the first time through the console, specify the password for the admin user: Do you want to enforce secure password standard (yes/no): yes    Enter the password for "admin":    Confirm the password for "admin":       Would you like to enter the basic configuration dialog (yes/no): no Switch to configuration mode and specify the firmware file: configure terminal show incompatibility nxos bootflash:nxos.7.0.3.I4.6.bin boot nxos bootflash:/nxos.7.0.3.I4.6.bin exit Save the configuration and reboot the switch: copy running-config startup-config   reload This command will reboot the system. (y/n)?  [n] y Next, we look at the current and saved configuration: show running-config show startup-config During switching on the switch, if necessary, you can switch to bootloader mode: Press  ctrl L to go to loader prompt in 2 secs From the bootloader, ...
Post a Comment
Read more