Skip to main content

How to enter Safe Mode in Windows 11




Safe Mode in the Windows 11 operating system allows you to troubleshoot and narrow down possible causes. However, accessing it is not as easy as it might seem, but it can be done in several ways. 

If you want to know how to boot into Safe Mode in Windows 11, you've come to the right place. This article provides detailed step-by-step instructions to help you take the first step towards troubleshooting potential issues.

How to boot into safe mode

Safe Mode "removes" most of the things that can cause problems and crashes and helps you troubleshoot. There are many ways to boot in safe mode. Which one you choose depends on your preference as well as what is available to you. For example, if you are stuck at the login screen, you cannot access the settings to enter Safe Mode.

Here are the possible ways to boot into Safe Mode in Windows 11.

The first method is the

The system can be booted to the desktop normally.
1. After entering the Windows 11 desktop, click the Start menu, and then click "Settings."
2. Then select "System-Recovery";
3. Click "Restart Now" on the right side of Advanced Startup
4. Select an option and select "Troubleshooting."
5. Click "Advanced Options" in "Troubleshooting"; 6. Click "Startup".
Settings "in Advanced Options;
7. Click the "Restart" button;
8. The computer will restart at this time. After restarting, you will see the interface as shown below. Press the "F4" key or the number "4" to select Safe Mode. Other modes are also selected using this method, and they will go directly after selection.
 
The first method is that the system cannot be started normally, and you must enter safe mode to restore the system.
 
1. When the Windows logo appears, turn off the computer and force a shutdown.
2. Repeat this 3 times, then you will be redirected to the automatic repair screen.
3. Click "Advanced Options."
4. Select "Troubleshooting."
5. Select "Advanced Options."
6. Click "Startup Settings."
7. Click the restart button, and you will see the safe mode menu after restarting.

Visit Also




Comments

Popular posts from this blog

BDCOM OLT All Commands ( BDCOM )

 

BDCOM How to reboot ONU

  When connecting, let’s switch to elevated privilege mode:        Enable       epon reboot onu interface ePON 0/2:1           Are you sure to reboot the ONU(y/n) To answer the question below, press the y key  Watch full videos in YouTube Visit Also BDCOM How to reboot ONU -  New! BDCOM. How to reboot ONU How to view information about ONU on BDCOM OLT Setting up BDCOM P3310 EPON

Configuring Cisco Nexus N3K-C3064PQ-10GX Cisco Nexus 3000)

  The switch has 48 SFP+ 10 Gb/s and 4 QSFP+ 40 Gb/s ports When connecting for the first time through the console, specify the password for the admin user: Do you want to enforce secure password standard (yes/no): yes    Enter the password for "admin":    Confirm the password for "admin":       Would you like to enter the basic configuration dialog (yes/no): no Switch to configuration mode and specify the firmware file: configure terminal show incompatibility nxos bootflash:nxos.7.0.3.I4.6.bin boot nxos bootflash:/nxos.7.0.3.I4.6.bin exit Save the configuration and reboot the switch: copy running-config startup-config   reload This command will reboot the system. (y/n)?  [n] y Next, we look at the current and saved configuration: show running-config show startup-config During switching on the switch, if necessary, you can switch to bootloader mode: Press  ctrl L to go to loader prompt in 2 secs From the bootloader, ...