Skip to main content

How to turn on 4G on an Android smartphone if it's not there


If you are sure that you are in the coverage area of a 4G network, and your smartphone only connects to 3G, then the problem is probably in the gadget settings. You can turn on 4G on an Android smartphone by changing a single parameter. Your mobile internet will not become cheaper or more expensive, but it will be much faster.

 

  1. Open settings and click on "Mobile network".
  1. Select the second item from the top, "Mobile data".
  1. In the window that opens, find the item "Preferred network mode". You are right there.
  1. Finally, in the list that opens, select Auto 4G/3G/2G.

 

Now you can exit the settings and use the mobile internet at maximum speed. When you leave, your smartphone will automatically switch to 3G and restore the connection to 4G as soon as possible; you do not need to change the settings again.

For the instruction, which was compiled for Android 10, we took screenshots on a Huawei smartphone. For previous versions of this mobile operating system on gadgets from other manufacturers, the sequence of actions may differ slightly. The Internet can even disappear on a smartphone if you do not monitor your balance. It is most convenient to control it and all connected services in the free My MTS application.

#madankc #android #4G

Comments

  1. Great content is written. We get a lot of information from your site. Also keep providing us with unique information and techniques.Have a look at this blog for more special information about mobile.👇👇👇👇👇👇👇👇👇👇👇👇
    Before buying a new mobile phone, you should know a few things In the following blog we are telling you in detail the technique of buying and checking new mobile.

    https://pakistantravelerspk.blogspot.com/2022/05/top-5-important-things-to-remember-how.html

    Review TECNO Spark7

    https://pakistantravelerspk.blogspot.com/2022/04/tecno-spark-7-rateprice-in-pakistan-is.html

    ReplyDelete

Post a Comment

Popular posts from this blog

BDCOM OLT All Commands ( BDCOM )

 

BDCOM How to reboot ONU

  When connecting, let’s switch to elevated privilege mode:        Enable       epon reboot onu interface ePON 0/2:1           Are you sure to reboot the ONU(y/n) To answer the question below, press the y key  Watch full videos in YouTube Visit Also BDCOM How to reboot ONU -  New! BDCOM. How to reboot ONU How to view information about ONU on BDCOM OLT Setting up BDCOM P3310 EPON

Configuring Cisco Nexus N3K-C3064PQ-10GX Cisco Nexus 3000)

  The switch has 48 SFP+ 10 Gb/s and 4 QSFP+ 40 Gb/s ports When connecting for the first time through the console, specify the password for the admin user: Do you want to enforce secure password standard (yes/no): yes    Enter the password for "admin":    Confirm the password for "admin":       Would you like to enter the basic configuration dialog (yes/no): no Switch to configuration mode and specify the firmware file: configure terminal show incompatibility nxos bootflash:nxos.7.0.3.I4.6.bin boot nxos bootflash:/nxos.7.0.3.I4.6.bin exit Save the configuration and reboot the switch: copy running-config startup-config   reload This command will reboot the system. (y/n)?  [n] y Next, we look at the current and saved configuration: show running-config show startup-config During switching on the switch, if necessary, you can switch to bootloader mode: Press  ctrl L to go to loader prompt in 2 secs From the bootloader, ...