Skip to main content

How to display desktop icons in Windows 11

 Windows system desktop often used:

computer (the old windows95/98 called my computer), recycle bin, user's files, control panel, network.
Starting from Windows 7, every new generation of operating system by Microsoft will not be displayed by default after the installation of the system is completed. It needs to be set, and the setting method is slightly different.

1. Right-click on an empty space on the Windows 11 desktop and select "Personalize".

2. Select "Theme".

3. Select "Desktop Icon Settings".

4. Check the desktop icons you want to display, apply, and click OK


Visit Also


Labels:

Comments

Post a Comment

Popular posts from this blog

BDCOM OLT All Commands ( BDCOM )

 
Post a Comment
Read more

BDCOM How to reboot ONU

  When connecting, let’s switch to elevated privilege mode:        Enable       epon reboot onu interface ePON 0/2:1           Are you sure to reboot the ONU(y/n) To answer the question below, press the y key  Watch full videos in YouTube Visit Also BDCOM How to reboot ONU -  New! BDCOM. How to reboot ONU How to view information about ONU on BDCOM OLT Setting up BDCOM P3310 EPON
Post a Comment
Read more

Configuring Cisco Nexus N3K-C3064PQ-10GX Cisco Nexus 3000)

  The switch has 48 SFP+ 10 Gb/s and 4 QSFP+ 40 Gb/s ports When connecting for the first time through the console, specify the password for the admin user: Do you want to enforce secure password standard (yes/no): yes    Enter the password for "admin":    Confirm the password for "admin":       Would you like to enter the basic configuration dialog (yes/no): no Switch to configuration mode and specify the firmware file: configure terminal show incompatibility nxos bootflash:nxos.7.0.3.I4.6.bin boot nxos bootflash:/nxos.7.0.3.I4.6.bin exit Save the configuration and reboot the switch: copy running-config startup-config   reload This command will reboot the system. (y/n)?  [n] y Next, we look at the current and saved configuration: show running-config show startup-config During switching on the switch, if necessary, you can switch to bootloader mode: Press  ctrl L to go to loader prompt in 2 secs From the bootloader, ...
Post a Comment
Read more