Skip to main content

how to change netis router password ?



  • Open your chrome browser in Mobile or Desktop
  • in search bar type 192.168.1.1

To change the Wireless security password:

  1. Click on the Wireless tab and then click on the Wireless Security sub-menu.
  2. Several security options are available to pick from. Select the WPA/WPA2 – Personal option.
  3. Now type the wireless password in the respective field box. This will be the user’s wi-fi password.
  4. Click on Save to save the new wifi password.

Change the Netis Router Password:

After validating the Netis admin interface with the default password and login, follow the below steps to change the Netis password.

To change the router default password:

  1. Navigate to System Tools/Settings.
  2. Select the Password option from the sub-menu.
  3. Verify old username & password.
  4. Enter the new username and password.
  5. Save the settings & restart the router.

OR

Watch This Video

Congratulation Your WiFi Password is Changed


Reset Netis to Factory Settings:

Follow the steps given below to factory reset your Netis:

  1. Locate the Reset button present on the router. It is usually present at the back of the router. Use a pen or a paper clip to press and hold it for about 30 seconds.
  2. Observe the LED light on the router. If it blinks or flashes, that means your router is resetting.
  3. Unplug the router from the power supply for 30 seconds and plug it back in to complete the reset network process.

# wifi_password_change netis  dglink #madankc #password_change_in_netis_router

netis.cc wifi password change netish router


Also Read

Comments

Popular posts from this blog

BDCOM OLT All Commands ( BDCOM )

 

BDCOM How to reboot ONU

  When connecting, let’s switch to elevated privilege mode:        Enable       epon reboot onu interface ePON 0/2:1           Are you sure to reboot the ONU(y/n) To answer the question below, press the y key  Watch full videos in YouTube Visit Also BDCOM How to reboot ONU -  New! BDCOM. How to reboot ONU How to view information about ONU on BDCOM OLT Setting up BDCOM P3310 EPON

Configuring Cisco Nexus N3K-C3064PQ-10GX Cisco Nexus 3000)

  The switch has 48 SFP+ 10 Gb/s and 4 QSFP+ 40 Gb/s ports When connecting for the first time through the console, specify the password for the admin user: Do you want to enforce secure password standard (yes/no): yes    Enter the password for "admin":    Confirm the password for "admin":       Would you like to enter the basic configuration dialog (yes/no): no Switch to configuration mode and specify the firmware file: configure terminal show incompatibility nxos bootflash:nxos.7.0.3.I4.6.bin boot nxos bootflash:/nxos.7.0.3.I4.6.bin exit Save the configuration and reboot the switch: copy running-config startup-config   reload This command will reboot the system. (y/n)?  [n] y Next, we look at the current and saved configuration: show running-config show startup-config During switching on the switch, if necessary, you can switch to bootloader mode: Press  ctrl L to go to loader prompt in 2 secs From the bootloader, ...